Brookmead 70 Driveway / Entrance Gate
A stylish look either as a pair for a Driveway or a single entrance Gate. Frame, ledged and braced with the strength, beauty and durability of class 3 graded Douglas. Half weather detail to the top of stiles, traditional mortice and tenon joinery 20mm T & G infill with a smooth finish.
These Gates are supplied with heavy duty Hardware.
Maximum width for each leaf 1.75m and a maximum height to the top of stile 1.50m. Bespoke widths or heights can be had as long as it is below our maximum. For more information please contact us.
70mm x 100mm Frame
Hardware included see images
Available in galvanised or epoxy black,
Adjustable hinge set, ring latch, drop bolt, and centre stop.
Drop bolt or centre stop not included with single Gate,
Centre stop galvanised only.
information, the heavy duty adjustable hinges included are designed to go on the rear or front of the post or pillar not in-between and can open 180° and are hung on hooks on plates.
Brookmead, Driveway, Entrance Gate
Hardware supplied with these Gates
Click image for more info
Prices include TVA
Height 1.20m to top of stile
1.0m 266.00 € to fit a 1.03m opening
3.00m 686.00 € to fit a 3.06m opening
3.50m 896.00 € to fit a 3.56m opening
Height 1.50m to top of stile
1.00m 386.00 € to fit a 1.03m opening
3.00m 986.00 € to fit a 3.06m opening
3.50m 1286.00 € to fit a 3.56m opening
Bespoke sizes available up to a maximum of 1.50m high to top of stileand 3.50m long (a pair)
The products below can be added to your Gate and are available in Galvanised or Epoxy Black, Please visit our Gate & Door Furniture for more items to enhance your Gate.
Hasp & Staple
Important note on installation. When installing please allow 60mm extra between posts or pillars for double gates and 30mm for a single gate.
Example, a 3.00m pair of gates would need an opening of 3.06m alowing 60mm for spacing
Long throw marine grade lock
Half weathered top and adjustable hinge
Morticed pickets between rail