The "Newton"Driveway, Entrance, Cottage Gate
A traditional look either as a pair for a Driveway or a single entrance Gate. This budget pallisade gate with a Z frame and strength, beauty and durability of "Douglas" timber with the added protection of a water resistant anti UV oil. Pointed tops to pickets (Palisade) attached to 25mm x 70mm rail and strut, with a smooth finish.
These Gates are supplied with Hardware.
Maximum hieght 1.20m and maximum length of each leaf 1.75m, single gates supplied with T Hinges and latch, a pair supplied with T Hinges, latch and a 150mm bolt. All hardwarefinished in BZP and supplied with fixings. Below are some prices of common sizes, but any size can be made up to our maximum.
Prices include TVA
Hardware included *
1.00m 89.00 €
2.50m 229.00 €
3.00m 270.00 €
3.50m 325.00 €
Height 1.20m to top of stile
1.00m 110.00 €
2.50m 270.00 €
3.00m 325.00 €
3.50m 375.00 €
Bespoke sizes available up to 1.20m high and 3.50m long
Important note on installation. When installing please allow 60mm extra between posts or pillars, for double gates and 40mm for a single gate.
Example, a pair of gates measuring 3.00m allow 3.06m between posts or pillars
The "Newton", budget Palisade Gate.
Hardware included see images below *
Available BZP only.
T Hinges, Auto-catch, with single gate.
T Hinges, Auto-catch, and 450mm cane bolt double gates.
information, the T Hinges hinges included are designed to go on the front or rear of the post or pillar not in-between.
This Gate is made to order, please allow up to 28 days for collection or delivery
Height up to 1.20m
Top/bottom rail /brace 70mm x 25mm
Palisade/Pickets 20mm x 70mm
Bracing will vary depending on the size of the Gate
Oil treatment applied
A clear water resistant Anti UV treatment displaying the natural colour of the wood, nourishing the timber allowing it to breathe while resisting moisture and slowing the greying process.