SEVEN BAR GATES

Seven bar gates supplied with a choice of hardware, we offer 2 variations of adjustable hinge sets, either with hook on plates suitable for timber post or hard surface installations or top hook to bolt and bottom hook drive suitable for timber posts only. Hinges are attached to gates prior to delivery but loops, latches and bolts are supplied separate for the installer to apply. These gates are ideal for stopping the passage of small animals.

7BAR SINGLE DRIVE GALV WEB.jpg

Single gate and adjustable hinge set with bottom hook to drive and top hook to bolt, auto latch (can be padlocked).

Application: Timber posts.

Latch: For gate to close against the face of a post. 

7BAR DOUBLE DRIVE GALV WEB.jpg

Double gates and adjustable hinge sets with bottom hook to drive and top hook to bolt, centre closing loop and 600mm drop bolt.

Application: Timber posts.

Latch: For gates to hang on the face or between posts. 

7B COMBINATION DRIVE GALV WEB.jpg

Combination gates and adjustable hinge sets with bottom hook to drive and top hook to bolt, centre closing loop and 600mm drop bolt.

Application: Timber posts.

Latch: For gates to hang on the face or between posts. 

7BAR SINGLE PLATE GALV.jpg

Single gate and adjustable hinge set with hooks on plates , auto latch (can be padlocked).

Application: Timber posts or brick, stone, concrete pillar.

Latch: For gate to close against the face of construction. 

7BAR DOUBLE PLATE GALV WEB.jpg

Double gates and adjustable hinge sets with hooks on plates, centre closing loop and 600mm drop bolt.

Application: Timber posts or brick, stone, concrete pillar.

Latch: For gates to hang on the face or between posts or pillars. 

7B COMBINATION PLATE GALV.jpg

Combination gates and adjustable hinge sets with hooks on plates, centre closing loop and 600mm drop bolt.

Application: Timber posts or brick, stone, concrete pillar.

Latch: For gates to hang on the face or between posts or pillars.